Shree Ceramic Fibers Pvt. Ltd.
Shree Ceramic Fibers Pvt. Ltd.
Chhoti Gwaltoli, Indore, Madhya Pradesh
SEND SMS
SEND EMAIL

PUF-PIR Pipe section And Boards

 

PUF / PIR Pipe Section and Boards

PUF / PIR Pipe Section and Boards
  • PUF / PIR Pipe Section and Boards
Ask For Price
Product Price :Get Latest Price
ShreeFoam Rigid PU foam cored pipe sections manufactured and are available in Varied sizes and density. Being CFC free polyurethane ‘Foam, it is "Environment Friendly" and have with compressive strength.
TECHNICAL SPECIFICATIONS FOR PUF / PIR BOARDS & PIPE SECTIONS
PROPERTIESPUFPIR
Temperature Limit-180°C to +110°C-200°C to +150°C
Density36 + 2 Kg/m336 + 2 Kg/m3

Higher densities available on customer requirementsHigher densities available on customer requirements
Available Size1. Boards 1 m x 0.5m1. Boards 1 m x 0.5m

2. Pipe Section to suit 50 to 250 mm NB x 1 m longPipe Section to suit 50 to 250 mm NB x 1m long.

Other sizes also available on demand3. Other sizes also available on demand

4. Custom moulded shapes to suit Horton spheres 86 shiplap pipe-section.4. Custom moulded shapes to suit Horton spheres 86 shiplap pipe-section.

5. Thickness from 25 mm to 100 mm 86 Cast-in-Situ.5. Thickness from 25 mm to 100 mm 86 Cast in Situ.
Thermal Conductivity cle (initial) at 100°CMax. 0.021 W/mk
(0.15 BTU-in/hr.sft.degF)
Max. 0.021 W/mk
(0.15 BTU-in/hr.sft.degF)
Fire Resistance Properties
Surface Spread Flame (BS:476 Part-7, 1987)
Class - I
Ignitability
(BS:476 Part-5, 1968)
Class `P' (Not Easily Ignitable)Class 'P' (Not Easily Ignitable)
Mean Extent of Burn (BS: 4735 Part-7, 1971)Less than 25 mmLess than 25 mm
Toxicity
1.0142
Smoke
780.89
Oxygen
25
Water Vapour Transmission (BS:4370 Part-2, 1972)5.84 x 10-3 vg-m/sN5.84 x 10-3 ptg-m/sN
Closed Cell Content90% (Min.)90% (Min.)
Compression Strength in direction of rise172 KN/m2 (1.75 Kgf/cm2)172 KN/m2 (1.75 Kgf/cm2)
Request
Callback
Yes! I am Interested

PUF Supporter

PUF Supporter
  • PUF Supporter
Ask For Price
Product Price :Get Latest Price

"ShreeFoam" offers a wide range of PUF Supports. The normal density of PUF support ranges from 80 kg/m3 to 350 kg/m3 but higher density PUF supports can be made available against specific customer requirements.

 

Features:-

 

  • Durable

  • Available in varied density and dimensions as per customer requirement

  • Pre-fabricated and ready to use. Sawing and shaping not required. + Water Resistant no wet or dry rot.

  • Fire retardant, hence safer.

  • Construction Friendly.

 

PROPERTIES ADVANTAGES

Wide Density Range

Higher densities enable higher loads without increase in surface area.

Factory Pre-Engineered

Sawing and shaping at site not required.
The support matches pipe's OD precisely.
Drastic reduction of installation time.

Closed Cell Structure

Closed cell structure does not permit water penetration.
No dry and wet rot.

Excellent 'k value

Provides much superior insulation as compared to timber and other materials. No condensation at support point.

So no drips, puddles or energy wastage

Good Fire Resistance

Better Safety at site.
Durable compared to other material.

Closed Dimensional Tolerances

Pipe Support thickness is in perfect alignment with insulation
thickness, resulting in smooth finish at support location.

Supplied in assembled condition, completed with all metal attachments

Faster installations.
Joint-free in the load bearing area, even for larger diameters of pipe.

Special sizes, Shapes and Finishes

On customers requirement, non standard sizes and shapes can be
manufacturers to suit specifications. Supports can be supplied with a
factory - applied coat of fire-resistive mastic, which also serve as a
vapour barrier, on the exposed surface

Request
Callback
Yes! I am Interested

Ceramic Fiber Boards

Ceramic Fiber Boards
  • Ceramic Fiber Boards
Ask For Price
Product Price :Get Latest Price
Vacuum Ceramic Fiber Boards formed ceramic board and shapes are rigid products made from Ceramic Fiber which is mixed with organic and inorganic binders with or without mineral fillers. The key feature of this Heat Insulation Board is that it contains no asbestos element but has high strength due to long resilient filament structure and binder system. This gives it very high insulating value, makes it resilient and chemical resistant. It is unaffected by water/chemical spillage and its physical properties are restored on drying.

Features:

  • Low thermal conductivity
  • Resistance to thermal shock
  • Greater mechanical strength
  • Even density, thickness
  • Can withstand gas flow velocity of 30 m/sec

Applications:

  • Hot face lining for furnaces & kilns
  • Combustion chambers of boilers & heaters
  • Backup insulation to castable & bricks
  • Ladle covers, Aluminum through lines, Trough covers, Expansion joints, Hot gas duct lining, Riser sleeves, Crucibles, Launders, Tap out cones, Sight holes etc.


Specifications:

Type

(1) Grade 1260 °C Reg. Temp.

(2) Grade 1300 °C Reg. Temp.

(3) Grade 1425 °C High Temp.

Thermal Conductivity (w/m k) at mean temp. of 550 °C

0.12

Dimensions

500 x 1000 mm

{Other sizes & shapes on request}

Thickness (mm)

15, 19, 25, 38, 50, 63, 75

Density (kg / m³ )

260 - 400

Request
Callback
Yes! I am Interested
X

Explore more products



Reach Us
Joseph (Proprietor)
417, Prem Trade Center, Maharani Road
Chhoti Gwaltoli, Indore- 452007, Madhya Pradesh, India



Call Us

Share Us

F GT L


Send E-mailSend SMS